job_072011g: GaAs Process Dev Eng-110247, Avago Technologies (Fort Collins, CO)

From: Kristin Burns <kristin.burns_at_stanford.edu>
Date: Wed, 20 Jul 2011 13:59:05 -0700

What:
Career Opportunity

Where:
Avago Technologies (Fort Collins, CO)

Position Title:
GaAs Process Development Engineer-110247

Position Description:

As a Manufacturing Development Engineer with the
Wireless Semiconductor Division (WSD), you will
develop and sustain wet etch and electroplating
unit processes in our 6", state of the art,
MEMS/CMOS/GaAs development and production
facilities which are located along the Front Range in Northern Colorado.

The primary duties of this position are to
develop, implement, and maintain wet etch and
electroplating unit processes for the manufacture
of wireless products. You'll spend time
conducting experimental design and data analysis
to improve processes and support process changes,
ensuring the identification and resolution of
yield and defect issues, and communicating results across our organization.

Specific Objectives and Responsibilities:
• Work with Product Engineering and others in
manufacturing to improve and stabilize wafer wet
etch and electroplating fabrication processes
with respect to quality, yield, reliability,
productivity, cycle time, and cost reduction.
Characterize and document improvements.
• Characterize and optimize wet etch, strip, wet
clean, and electroplating processes.
• Create and maintain process controls and
metrics for wet etch and electroplating processes
and equipment in a high volume manufacturing environment.
• Deliver robust wet etch and electroplating
solutions to address development and
manufacturing issues and problems in
collaboration with various development teams,
equipment maintenance, and operational organizations.
• Work with the process development groups and
others in manufacturing to deliver new wet etch
and electroplating unit processes as required to
meet the technical requirements of new technology
development programs. Characterize and document new processes.
• New wet etch and electroplating tool selection,
acceptance, and start-up as well as optimization
and upgrade work to improve performance on tooling platforms.
• Waste minimization and operational cost improvements.
Qualifications

• BS (MS or higher preferred) in EE, ME, ChE,
Materials Science, Physics or Chemistry or related engineering discipline.
• Two or more years experience in wafer process
technology development or manufacturing.
• Wet Etch and electroplating skills and
knowledge (experience with GaAs wet etch and
electroplating manufacturing processes a strong plus):
  Wet etch and electroplating chemistries and
reactions, interactions, and materials behavior.
  Understanding of devices and impact of unit process on DC and RF response.
  Applied wet etch and electroplating equipment and subsystem knowledge.
  Use and knowledge of wet etch and
electroplating literature and reference materials.
• World class manufacturing practices and process control techniques .
• Excellent teamwork and good verbal and written
communication skills. Demonstrated strong
partnership skills with Operational and Equipment Maintenance organizations.
• Good problem solving skills. Sound analytical
techniques and ability to solve problems
systematically. Design of experiment,
characterization, and optimization capabilities.
Applied statistical manufacturing controls and
unattended unit operations experience.
• Demonstrates good judgment in selecting methods
and techniques for obtaining solutions.
• Additional knowledge/experience in one or more
of the following areas preferred:
  IC fabrication unit processes: Dry Etch,
Deposition (CVD, sputtered, evaporated), Photolithography.
  Semiconductor device physics.
  Understanding of general processing
techniques/concepts for GaAs based devices and/or GaAs applications.
• U.S. Citizenship or permanent work visa.

Company Overview:
· Avago Technologies is a leading supplier
of analog interface components for
communications, industrial and consumer applications.
· By leveraging its core competencies in
III-V compound and silicon semiconductor design
and processing, the company provides an extensive
range of analog, mixed signal and optoelectronics
components and subsystems to more than 40,000 customers.
· Backed by strong customer service
support, the company's products serve four
diverse end markets: industrial and automotive,
wired infrastructure, wireless communications, and computer peripherals.
· Avago has a global employee presence and
heritage of technical innovation dating back 50
years to its Hewlett-Packard roots. Information
about Avago is available online at <http://www.avagotech.com>www.avagotech.com.

Recent News:
· Avago is preparing to invest
significantly in on-shore semiconductor manufacturing.
· The company has recently announced
plans to invest nearly 75 million dollars to
retrofit an existing manufacturing facility in Fort Collins, Colorado.
· Avago’s continued investment in U.S
based semiconductor manufacturing is clearly a
strategic move that will strengthen the company’s global supply chain.
· This FAB expansion is expected to
create about 100 high-tech jobs in the area
around Fort Collins, Colorado and the company is
beginning to actively hire those engineers and technologists right now.

For a comprehensive list of opportunities, please visit:
<http://www.avagotech.com/pages/corporate/careers/>http://www.avagotech.com/pages/corporate/careers/

Or, to express interest in regard to this particular position, please contact:

Shane Johnson
Avago Technologies
Global Talent Acquisition Team
Senior Recruitment Consultant
<mailto:shane.johnson_at_avagotech.com>shane.johnson_at_avagotech.com




- - - - - - - - - - - - - - - - - - -
Potential applicants should communicate directly
with the contact listed in the posting. Please
do not "reply" to the posting messages.

Job postings are archived at
http://design.stanford.edu/archive/ (the
archive is not working right now - we hope to have it fixed soon)

Note: The job postings distribution list
contains several distribution lists: Design grad
students, ME310 alumni, ME218 alumni, ME jobs
list, etc. Members of multiple lists will
receive multiple copies of postings. Please
excuse the duplication. Thank you.
Received on 2011-07-20 13:58:56

This archive was generated by hypermail 2.3.0 : 2016-01-25 19:18:02 PST