1

0.00s

200us/

1

RUN

1.00V

1

What the display says:

Vertical sensitivity of CH1

is 1Volt per major division

Horizontal sweep speed is

200 sec per major division

Channel 1 is ON

Ground (V=0)

[If dc part of CH1 signal

is too big, ground

arrow points off-screen.

If this happens, adjust

vertical sensitivity]

Trigger slope

is positive

(rising edge)

Trigger source

is Channel 1

Scope is ready for trigger

Time=0

Blinks if

no trigger

t > 0

t < 0

m

Readings scaled

for a 10:1 probe

Previous slide

Next slide

Back to first slide

View graphic version