I am a Stanford MSME graduate (2008), currently working for a product
design consulting company. We need assistance from someone with
expert knowledge of Centrifugal Blower Design. I'm wondering if a
professor (or someone they know) would be interested in doing a small
scope of consulting work.
Work details: It is paid work, likely no travel needed, duration of a
few hours to several days (depending on applicable knowledge and your
availability), immediate need.
Some Design details: Application requires approximate air flow of
Q=6SCFM at pressure of 2psi, blower diameter on the order of 3" to
5", consumer product, cost sensitive, ideally would minimize noise
(although that may be achieved in a secondary enclosure).
What we need: Your experience in detail design of single stage
blowers and multi-stage blowers. We want to quickly map out some
design details and create a high-level document of the tradeoffs
between several approaches.
If this sounds interesting, please contact me directly.
Anurupa Rao, Design Engineer
anurupa@d2m-inc.com
www.d2m-inc.com
- - - - - - - - - - - - - - - - - - -
Potential applicants should communicate directly with the contact
listed in the posting. Please do not "reply" to the posting messages.
Job postings are archived at http://design.stanford.edu/archive/
Note: The job postings distribution list contains several
distribution lists: Design grad students, ME310 alumni, ME218
alumni, ME jobs list, etc. Members of multiple lists will receive
multiple copies of postings. Please excuse the duplication. Thank you.