|
|
Mechanics - Structure
|
|
|
Click the thumbnails below for a larger image
The main purpose of the structure is to hold the top assembly and Plinko board in the proper position
relative to each other. This spacing is rather important since the top assembly
needs to be able to consistently drop pennies into the Plinko board when the drop lever
on the top assembly is
pulled.
The structure was constructed using 0.75 inch square aluminum tubing for the legs and one inch aluminum
angle brackets for the bottom supports.
The scaled drawings are intended to convey the general size of the full assembly
rather than dimension every part. Fully dimensioned SolidWorks files may be downloaded
here or in the downloads section. |
|
|
|
|
|
|