Home Mechanics Plinko Board
	Mechanics - Plinko Board Click the thumbnails below for a larger image The Plinko board is the main feature of the Plinko MPAG. The Plinko board also features supports on the bottom for mounting the lower coin detector circuitry. The back of the Plinko board was constructed using thick foamcore. The pegs were added by inserting map pins into the foamcore. Masonite strips were uesed as spacers on the edges of the board and a sheet of plexiglass served as the front cover. The scaled drawings are intended to convey the general size of the full assembly rather than dimension every part. Fully dimensioned SolidWorks files may be downloaded here or in the downloads section.